RO systems
A final microbial-control stage after the required RO and filtration stages.
INLINE POU UVC LED MODULE · 1 GPM
EC-10 1 GPM Inline UVC LED Module for POU Systems
Compact on-demand microbial control for drinking-water appliances.
EC-10 is a compact 1 GPM POU module for drinking terminals, RO systems, dispensers and OEM appliances.
4 L/min Maximum flow · 1 US GPM
7 W Input power
140 mW UVC radiant output
Ø48 × 108 Product envelope · mm
PRODUCT ROLE
A compact POU stage for appliance and terminal integration.
EC-10 adds a compact UVC treatment stage alongside the sediment, carbon or membrane filtration selected for the complete drinking-water appliance.
APPLICATION FIT
Match the compact module to the host appliance.
- Flow matching: our application team matches the model to the highest realistic draw and target operating condition
- Water review: we review UVT, turbidity, hardness, iron and the appropriate pretreatment
- Mechanical fit: we align pressure, connection, flow direction, mounting and service clearance
- Electrical fit: we select the suitable supply, appliance controls and flow-activation configuration
- Project documents: we prepare the relevant drawing, model report and market documents for review
Water dispensers
On-demand POU treatment where the real peak flow fits the 4 L/min basis.
Coffee equipment
Compact integration with confirmed flow, water quality, voltage and service access.
Drinking terminals
POU terminals and OEM appliances with a defined connection and control plan.
ENGINEERING DATA
Specifications for model selection.
The current drawing, datasheet and manual are available for project review. Our team will align them with the quoted configuration.
01
DIMENSION DRAWING EC-10 mechanical drawing
Hydraulic & mechanical
Fit the model to the water path.
- Maximum flow rate
- 4 L/min · 1 US GPM
- Maximum inlet pressure
- 0.8 MPa
- Water temperature
- 1–45°C
- Product dimensions
- Ø48 × 108 mm
- Net weight
- 150 g
- Water-contact materials
- POM, SUS304, PTFE and quartz glass
- Connection
- Interface shown on the current model drawing
Electrical & optical
Use the correct powered version.
- Input voltage
- 12 V DC or 24 V DC model version
- Input power
- 7 W
- UVC radiant output
- 140 mW
- UVC wavelength
- 270–280 nm
- L70 service basis
- 3,000 hours
- Test environment
- TC 22°C
04
ELECTRICAL & OPTICAL DATA Product parameters
| No. | Parameter | Symbol | Value | Unit |
|---|---|---|---|---|
| 01 | Input voltage | VIN | 12 / 24 | V |
| 02 | Input power | W | 7 | W |
| 03 | UVC radiation power | Φe | 140 | mW |
| 04 | UVC peak wavelength | WLP | 270–280 | nm |
| 05 | Lifetime test | L70 | ≥3,000 | h |
Measurement and version note
Product test environment is TC 22°C. Peak-wavelength and radiant-power measurement errors are ±3 nm and ±10%. The 12 V and 24 V entries are different model versions, not a wide-voltage design.
OEM INTEGRATION REVIEW
Match the POU module to the actual water path.
Our application team aligns peak draw, pretreatment, UVT, pressure, connection, supply version, control logic and service clearance with the appliance design.
- 01 Define water conditions
Peak flow, UVT, turbidity, temperature and upstream treatment.
- 02 Match mechanical fit
Pressure, connection size, flow direction, mounting and service clearance.
- 03 Select electrical version
Supply voltage, host-appliance logic, flow activation and safe cable routing.
- 04 Assemble project documents
Match the exact model report and compliance documents to the target project.
MODEL-SPECIFIC EVIDENCE
99.99% E. coli reduction recorded in the available EC-10 SGS report under its stated flow and water conditions.
The model report presents the organism, flow and water conditions behind this result; our team aligns them with the appliance design.
Open model test reportModel-specific results with clear test conditions.
The report identifies the model, organism, flow and water conditions behind the performance result.
Documents organized by project purpose.
Performance reports and compliance documents are listed independently for straightforward review.
Factory Test Items and Acceptance Criteria.
The table below lists the factory test items and acceptance criteria for the specific model.
The table below lists the factory test items and acceptance criteria for EC-10.
No. Test item Test method and criteria
01 Tensile test
Terminal-to-wire tensile force ≥30 N for 1 minute without loosening; welded wire-to-module tensile force ≥35 N without defects within 10 seconds.
02 Dielectric withstand voltage
1500 V / 50 Hz AC is applied between the live part and housing for 1 minute; the test sample remains undamaged.
03 Sealing test
Static pressure is held at 0.4 MPa for 5 minutes without air leakage.
04 Pressure resistance
Static water pressure is increased to 0.6 MPa within 5 minutes at a rate of ≤0.4 MPa/s and held for 15 minutes to check module water tightness.
05 Burst test
Water pressure is raised to 0.8 MPa within 70 seconds, held for 5 seconds and released; appearance, mechanical and electrical performance remain normal.
06 Cyclic pressure
10,000 repeated cycles at 0–0.45 MPa with a 2-second pressure rise are used to observe module water tightness.
07 Freezing test
The water-filled, blocked module is placed at −15°C for 48 hours and then thawed naturally; sealing performance remains normal.
08 Low-temperature storage
The sample is stored at −15°C ±2°C for 72 hours and recovered at room temperature for at least 1 hour; appearance remains normal, and UVC intensity and module working current meet the drawing requirements.
09 High-temperature storage
The sample is stored at 50°C ±2°C for 72 hours and recovered at room temperature for at least 1 hour; appearance remains normal, and UVC intensity and module working current meet the drawing requirements.
10 Thermal shock
The sample cycles 10 times between −15°C ±2°C and 85°C ±2°C with 30-minute holds and a 3-minute conversion time, then recovers at room temperature for at least 1 hour; appearance, UVC intensity and working current meet the drawing requirements.
11 Constant temperature and humidity
The module is placed in a 40°C, 85% RH test chamber for 168 hours without damage, and all functions remain available.
12 Vibration test
The packaged product is tested at 4 Hz (240 CPM) for 60 minutes to ISTA-2001; packaging shows no obvious damage or deformation, the product surface and parts show no mechanical damage, and product function remains normal.
13 Drop test
The inner and outer packaging boxes are each allowed to fall freely from 1 metre; packaging shows no obvious damage or deformation, internal fixtures show no obvious displacement, the product and parts show no mechanical damage, and electrical safety, performance and appearance meet the applicable requirements.
14 Hazardous substances
Module hazardous-substance content is checked against the limit requirements of the EU RoHS directive.
DOCUMENT CENTER
Review the technical package for your project.
Drawings, performance reports, installation documents and market files are organized by purpose for easier project review.
APPLICATION REVIEW
Find the right EC-10 configuration for your project.
Share your peak flow, water quality and integration requirements. Our application team will match the model, configuration and supporting documents to your project.