CE conformity document
UVC LED Series CE Compliance Certificate
Scope: LED UV water-purifier models listed in certificate HA0124NB093426EM and its attachment. The certificate addresses the stated EMC conformity basis.
Document type · Model scope · Market requirement
UVC LED Certifications & Compliance Documents
Use this centre to locate Agua Topone's currently published compliance documents and the separate model-specific test-report library. Every file must remain attached to the exact models, configuration and purpose stated in that document.
One file does not answer every compliance question
A CE conformity document, a drinking-water material document and a microbiological challenge-test report support different decisions. Confirm the file type first, then check the named model, standards, issuer, date, target market and supplied configuration.
Electrical and EMC conformity
The current CE document addresses the listed LED UV water-purifier models and the EMC standards named in the certificate and attachment.
Drinking-water contact scope
ACS and NSF/ANSI/CAN 372 files on this site are associated with AGLED-40002. Their scope must not be transferred to the complete product range.
Microbiological performance
SGS reports record a named sample, organism or indicator, flow, method and measured result. They are test reports, not universal product certification.
Available Documents
Open each PDF to review the model, standard, result and market scope it covers.
Drinking-water contact document
AGLED-40002 ACS Report
Scope: AGLED-40002 and the exact product or material scope stated in the report. It must not be presented as an all-model Agua Topone approval.
Low-lead content certification
AGLED-40002 NSF/ANSI/CAN 372
Scope: AGLED-40002 is named in CSA report 80178889 under the NSF/ANSI/CAN 372 low-lead content programme. This is not complete-system treatment certification.
Model-specific test reports
SGS Testing & Validation Library
Scope: Seven currently published PDFs for EC-10, EC-11, EC-12, AGLED-12G, AGLED-40002, AGLED-40006 and AGLED-40012.
Document scope matrix
| Document | Current public scope | What it supports | What it does not establish |
|---|---|---|---|
| CE certificate HA0124NB093426EM | Models listed in the certificate attachment | The conformity basis and EMC standards stated in the file | Microbiological performance or approval of an unlisted/modified configuration |
| AGLED-40002 ACS report | AGLED-40002 and the scope stated in the PDF | The drinking-water contact context described by the document | Full-range ACS status or disinfection performance |
| CSA report 80178889, NSF/ANSI/CAN 372 | AGLED-40002 among the models listed in the report | Low-lead content scope under the named programme | Microbiological efficacy or all aspects of a finished treatment system |
| SGS model reports | The seven models with a PDF in the Testing & Validation library | The named sample, method, organism or indicator, flow and report result | Performance beyond the named model, organism, flow, water conditions and stated test scope |
SGS microbiological test reports are available for the specified models and tested conditions. Open the full report to review the model, flow, organism, method and measured result.
Checklist before using a file in a project
Exact modelMatch the model, suffix, reactor, driver and supplied configuration.
Document typeSeparate conformity, material, low-lead and microbiological evidence.
Issuer and dateConfirm the issuing body, holder, report number and revision.
Named scopeRead the standards, materials, sample or performance property covered.
Target marketConfirm the country and finished-product requirements before assuming applicability.
Configuration changesReview fittings, voltage, controls, branding and materials against the document.
Document ScopeUse each document only for the models, standards and claims stated in the file.
Document revisionConfirm the applicable revision for the order or validation decision.
OEM and ODM projects require a scope review
Private-label artwork, rating labels, manuals, fittings, electrical input, wetted materials, control logic and finished-appliance integration can change the compliance route. A standard-product document should not be assumed to cover a modified configuration.
Start with the OEM & ODM route, identify the target market and required files, then confirm whether the current document set applies or whether further assessment is needed.
Request the document set for a specific model and market
Send the product, variant, intended country, finished-product use and required document type. We will confirm the available files and identify any scope that still needs review.